Testimonial

We received this shipment today. We tested all of the boards and are quite happy with the results! We did have one of the integrated boards which seem to be a little noisy, but overall this is much better quality assembly work than we have been able to get done anywhere else.

The services offered by your company fill a big need for us as we do not have the facilities to do this assembly well and have had problems finding companies willing to do small volumes at a reasonable price in a relatively short amount of time.

I am planning to ship the components for the next board first thing tomorrow.


Michael J. Kuhn

Ph.D. Candidate

Department of Mechanical, Aerospace, and Biomedical Engineering

University of Tennessee, the United States    

 I wanted you to know that we received the shipment, and I have tested the first few circuits,they all work!

Thanks again for providing a much needed service to my research. We should have another round of assembly work coming sometime in the next month.

 

Jon Richings

Original Design

The United States    

Thank you for the PCB: I received a couple weeks ago. They were good quality and worked well. You do good job.

Therefore, I have another design I would like get a quote on for PCB+assembly again.

 

Juha Nurminen

Florida ,USA

I received my boards today. They look very nice.

I'll contact you when I am ready with the next one.

Optys

Jim Darling 

Whitby, Canada

I just want to say thank you, the parts arrived yesterday and they are very good. This is the first time I have used Bittele and I am impressed!

 

David

Anx Solutions

Australia

Perfect boards. Thank you!

Mario Cifaldi

USA    

The boards look great! I plan to start testing next week.  Thanks much for your efforts especially

with my problem on one of the internal layers.

 

Kurt Metzger

University of Michigan, USA

The boards arrived safely, we have tested a few and all seems to be ok.

I have to say I am very impressed with your service and look forward to sending more prototype boards your way in the future.

I don't think I received a quotation regarding the AT45DB161D, see below.

 

James Gilkes 

Sensor Tech Ltd, USA

Below is our contact here in Scarborough for Bittele Electronics. Great service, great prices. Take standard Gerber files in RS-247-X format, same as you always use.

Stay in touch.

Vas

Telitex

I have received the boards and they look great. 

The Logger board was great, no problems with that one.

I am very happy with the quality of the boards.

 

Matthew Cochrane

Received the boards yesterday. It's been great doing business with

you.  We'll likeley be in contact wth you again soon with more orders.

 

Matt   

Wild Spy

We received the boards on Monday as predicted.  We are currently integrating them into our project.  From what we have seen, we are VERY pleased with your work.

 

Benny

Morega Systems

I just want you to know the boards came in Friday and they look great.  I didn't expect the enig finish on the boards J .  I'm sure you will get more jobs from us in the future.

As for the quote on the PCBs, we decided to go with a local vendor for delivery time reasons.

 

Magnus Karlsson

Howard Hughes Medical

Greetings,

My name is Gregory Cole and I work with Worcester Polytechnic Institute. Please find attached Gerber files, a BOM and assembly files. We would like to get a quote ASAP, and your company was highly recommended. Thank you and have a good day!

 

Greg

Electrical Engineering Department

Worcester Polytechnic Institute

Worcester, MA, 01609

Hi May Guo,

I appreciate your sending me this image. I can see that you did a perfect job with the BGA. I'm sure the other BGA, dU1, is just as perfect. Please ship the assembly and kit as soon as you can. And thank you again. All my best,

 

Michael Mermelstein

Hi Cherry/Ben, thank you for the great service and a high quality product.

Regards,

 

Peter McKibbin

VP Elec Eng

Andromedia Electronics LLC

Thank you for a very good job, 100% working.

 

Rowan Taubitz

Australia

Thank you, The boards work right. Good work!

We'll keep in touch. Sincerely.

 

Manuel Martinez Guillen

Energy R+D Specialist Technician

Hi Prabal,

I'm working on a new design for a board that will be similar in size and design rules to the ones you made. Those boards look good, so I will be sending you drawings for the new design in the next couple days. I was wondering if you can do buried vias (12mil or smaller holes will be fine.) Thanks.

 

George

Senior Materials Engineer

Hi,

Business with you all was a charm. You did a terrefic job. Looking foward to do business with you again.

Regards,

 

Nicolas

Montreal, Quebec, Canada

Hi Ben!

We received 180 boards, installed them and did some preliminary testing and so far everything is working great. Thanks for the getting them done so quickly on short notice and in good quality.

 

Darren

Saskatoon, Saskatchewan, CANADA

Hi all

I just got the boards. Thanks everyone worked on it and help me out! You guys did a really good job.

Thanks.

 

Vivien

Hi Cherry

The boards arrived today and everything is looking very good!

Thank you

 

Josh

Global Sensor

Hi All,

I have evaluated the 100 assembled boards, and they look great. Thanks very much!

 

Bob

Alexandria, VA 22305, USA

Hi

I have done all the tests now on the assembly, everything works beautifully and the board looks very cool and neat.

I am very pleased with your service, and during the production preparation your colleagues found 2 mistakes which I was able to correct. SO I am very happy with your service!

As this was my first time ordering PCB Assembly I will be aware of the typical mistakes from now on.!

I look forward to do further business with you and order a large quantity (100) in early January. Best regards,

 

Gustav

Denmark

Ben,

I’ve very happy with what I see so far. I don’t see any issues that could use improvement.

Particularly, you did a great job of removing visible flux residue! This is frequently an issue I have with assemblers, but not with this job… thanks.

I did a DC power up test on 8 of the 20 samples, and all powered up correctly. Next they are going to my customer’s for performance evaluation.

 

Jeff

Knoxville, TN

Hi Shadow,

Thanks for the invoice. I just wanted you to know that I’m quite happy with the service and the product. I received the last order a couple of weeks ago and they were excellent. The communications between me, you and the factory is superb, which is often a problem when going offshore. I really like your business model.

 

Paraj

Calgary, AB

Team Bittele,

We received the shipment today. Surprisingly the shipment was due at 12:00 and it arrived at 11:58, great job FedEx! The PCBAs were all boxed extremely well with no damage to the box or PCBA's. The internal packaging of the PCBA's were packed very well. We are currently unpacking and testing the RGB function by applying 24VDC. I will report back after we have tested all of them. Both Matt and I want to thank all of you and especially your internal employees for the excellent quality of the manufacturing of our PCBA's. The overall soldering and component placement are exceptional and have surpassed our expectations!

Thank you again for your continued communication and quality.

 

Jeff and Matt

Auburn, CA

 
Bittele Electronics Completes New PCB Assembly Line
Bittele strategy climbs turnkey PCB assembly ladder
Bittele Electronics Announces ISO 9001:2008 Certification
Bittele Electronics Reduces Customer Costs with Free Passive Parts Service
 
Design for Manufacturability (DFM) guide
Sample Bill of Materials (BOM)
Sample Assembly drawings
PCB Fabrication Specifications
 
testimonials
 
payment types
 
 
 
About Us | Services | Quality | Blog | Privacy | Contact
Copyright 2003-2017, Bittele Electronics Inc. All Rights Reserved.